Home Page
Instructions
 Keyword Search:
     

CATEGORIES

New Arrivals

Cabinet Hardware

Cabinet Latches

Mortise Locks

Rim Locks

Furniture Hardware

Hinges

Hooks

Window Hardware

Bolts

Thumb Latches

Miscellaneous

Door Knobs,Plates Etc.

Electrical




Mortise Locks
To order any item, enter the quantity desired and click "Add to Shopping Cart"
ML-000-049

Click for Larger Image
$ 40.00

1 - set
Available
Dexter Latch Set
Here is a lockset that has never been used, with screws, but no instructions. This set has a 2-3/8 inch backset. The one side is a dull black and the inside etched chrome with a privacy lock. The set would be great for a bathroom.
  Enter Quantity

ML-217

Click for Larger Image
$ 30.00

2 - sets
Available
Art Deco Passage Lock
These passage locks were made by the Lockwood Lock Co. and have never been used. The door plate and knobs are brass with an antique crackle finish. The door plates measure 2-3/8 X 4-1/2 inches long and come complete with screws.
  Enter Quantity

ML-250

Click for Larger Image
$ 295.00

1 - set
Available
Yale Exterior French Door Lock
This heavy duty lock has cast bronze trim and has never been used. The lock was missing a lock cylinder when found, so I added another cylinder that is keyed different from the inside one. The lock is for a 1-3/4 inch thick door that is hinged on the right pulling the door toward you. The lock measures 2-3/8 X 6-5/16 of an inch long with the edge plate being 1-1/4 X 8-5/8 inches long. The cast door plates measure 2-1/2 X 7-1/2 inches long and come with all the screws but no templates.
  Enter Quantity

ML-267

Click for Larger Image
$ 95.00

1 - set
Available
Double Acting Door Bolt Set
This set is for a door that swings both ways and a minimum thickness of 1- inches. The mortise deadbolt measures 3-5/8 X 2- inches high with the edge plate being 1-1/16 X 4 inches long. The lock was made by Yale with the stamped brass push plates with an antique finish. All parts are new old stock and come with screws. The push plates measure 3-1/8 X 14- inches long. The deadbolt has a 2- inch backset.
  Enter Quantity

ML-302

Click for Larger Image
$ 250.00

1 - set
Available
1850's Exterior Mortise Lock
An earl non-reversible mortise lock that is a right hand only. The lock measures 4-3/8 X 5-1/8 inches high with the edge plate being 1 X 7- inches long. The lock has a 3- inch backset and was originally plated in silver over cast brass.
  Enter Quantity

ML-344

Click for Larger Image
$ 55.00

1 - sets
Available
Art Deco Passage Locks
New old stock passage sets that are reversible. The door plates are stamped brass with an antique copper finish and measure 2-5/8 X 8-3/8 inches long. The lock measures 3-1/8 X 1-3/8 inches high with the edge plate being 13/16 X 3 inches long.
  Enter Quantity

ML-414

Click for Larger Image
$ 225.00

1 - set
Available
Norwalk Interior Mortise Lock
A reversible Victorian mortise lock with cast bronze trim. The lock measures 3-5/8 X 4-5/8 inches high with the edge plate being 1-1/16 X 6-5/8 inches long.
  Enter Quantity

ML-417

Click for Larger Image
$ 175.00

1 - set
Available
Norwalk Interior Mortise Lock
A reversible Victorian mortise lock with cast bronze trim. The lock measures 3-1/4 X 3-5/8 inches high with the edge plate being 7/8 X 5-3/4 inches long. The lock has a patent date of 1863 with a replacement strike plate and key escutcheon.
  Enter Quantity

ML-449

Click for Larger Image
$ 45.00

1 - set
Available
Store Handle Mortise Lock
This RHC mortise lock is reversible and has never been used. The lock is a passage style only with no locking device and can be used with 2 thumb style handles. The lock measures 3-3/8 X 2-7/8 inches high with the cast iron edge plate being 1-1/8 X 4-5/8 inches long.
  Enter Quantity

ML-454

Click for Larger Image
$ 175.00

1 - set
Available
Large Y & T Rabbited Mortise Lock
A huge rabbited mortise lock made by Yale & Towne that has never been used, just cleaned the brass up.This is a right hand only lockset which means its mounted on the right side of the door with the hinges visable on the left. The set is for a double set of doors with the one on the left being the active door standing on the inside. The lock body measures 3-7/8 X 7-5/8 inches high with the edge plate being 1-3/8 X 10-1/8 inches long. It take a cylinder lock which is 3 inches on center from the door knob hole {3/8 square} and on the inside the center for the door knob and the inch square safety key is 4- inches.
  Enter Quantity

ML-463

Click for Larger Image
$ 195.00

1 - set
Available
Secure Lever Mortise Lock
A reversible 4- backset lock that measures 6-1/8 X 2-7/8 inches high and has an edge plate that is 1 X 4-5/8 inches long. The lock is signed "Secure Lever" with new adjustable oval brass knobs and rosettes.
  Enter Quantity

ML-484

Click for Larger Image
$ 85.00

1 - set
Available
Art Deco Mortise Lock
This never used mortise lock is reversible and measures 3- X 3- inches high and the edge plate is 7/8 X 5- inches long. The door plates are stamped steel with a brass finish measure 1-7/8 X 6-5/8 inches long.
  Enter Quantity

ML-491

Click for Larger Image
$ 95.00

1 - set
Available
B.L.W. Rabbited Mortise Lock
A new old stock Branford Lock Works rabbited mortise lock that is a right hand only. This means the lock is mounted on the right with the hinges on your left pulling the door toward you on a set of double doors. The lock measures 3- X 4- inches high with a 1-1/8 X 6-5/8 inch long chrome edge plate. The lock has a 2-5/8 inch backset.
  Enter Quantity

ML-505

Click for Larger Image
$ 450.00

0 - set
Available
RHC Columbian Entry Lock
A reversible double key entry lock in cast bronze made by the Reading Hardware Co. in the "Columbian" pattern. The lock measures 3- X 4- inches high with the edge plate being 1 X 6-7/8 inches long. The front door plate measures 2- X 8-7/8 inches long. This set is known for the hidden fox heads and the one cast knob has a tiny ding on the edge.The lock is pictured as a right hand, if you need it reversed please let me know in the comments section.
  Enter Quantity

ML-511

Click for Larger Image
$ 150.00

1 - set
Available
Tappen & Haggart Passage Lock
An early non-reversible 2- backset lock that measures 3- X 2- inches high and has an edge plate that is 7/8 X 4 inches long. The lock is signed "Tappen & Haggart,New York,NY" with new adjustable brass knobs and rosettes. The lock is a left hand only which means the hinges are visable on the right pulling the door toward you. The brass knob with the shaft has a small dent on the edge visable on top in the picture.
  Enter Quantity

ML-512

Click for Larger Image
$ 250.00

1 - set
Available
RHC Columbian Mortise Lock
A reversible mortise lock with cast bronze trim made by the Reading Hardware Co. and is known for the hidden fox heads in the pattern. The lock measures 3- X 3- inches high with the edge plate being 1 X 5- inches long. The oval key escutcheon and the strike plate are replacement parts. The door plate measure 2-1/8 X 6 inches long.
  Enter Quantity

ML-518

Click for Larger Image
$ 85.00

2 - sets
Available
Interior Mortise Lock
A reversible mortise lock with wrought brass trim. The lock measures 3-1/8 X 3- inches high with the edge plate being 7/8 X 5-5/8 inches long. The door plates measure 1- X 6 inches long.
  Enter Quantity

ML-519

Click for Larger Image
$ 85.00

1 - set
Available
Interior Bathroom Mortise Lock
A reversible mortise lock with brass and nickel trim. The lock measures 3-1/8 X 3- inches high with the edge plate being 7/8 X 5-5/8 inches long. The door plates measure 1- X 6 inches long.
  Enter Quantity

ML-524

Click for Larger Image
$ 85.00

1 - set
Available
RHC Cabinet/ Window Mortise Lock
A reversible RHC narrow 1 inch backset that is one sided only. The lock measures 1- X 3- inches high with the edge plate being X 5 inches long. The cast brass door plate with attached lever measures 1-1/8 X 4- inches long. This set was used on large cabinet doors and windows.
  Enter Quantity

ML-525

Click for Larger Image
$ 85.00

1 - set
Available
Interior Mortise Lock
A reversible new old stock mortise lock with wrought bronze trim. The lock measures 3- X 3- inches high with the edge plate being 7/8 X 5-5/8 inches long. The door plates measure 1- X 5- inches long.
  Enter Quantity

ML-528

Click for Larger Image
$ 85.00

1 - set
Available
Interior Mortise Lock
A reversible new old stock mortise lock with wrought bronze trim. The lock measures 3- X 3-7/8 inches high with the edge plate being 7/8 X 5-5/8 inches long. The door plates measure 2-1/8 X 5- inches long.
  Enter Quantity

ML-530

Click for Larger Image
$ 85.00

1 - set
Available
Penn Cabinet/Window Mortise Lock
A reversible Penn narrow 1 inch backset that is one sided only. The lock measures 1-9/16 X 3-5/8 inches high with the edge plate being X 5 inches long. The cast bronze door plate with a copper & black finish with attached lever measures 1-1/8 X 4- inches long and was made by RHC. This set was used on large cabinet doors and windows.
  Enter Quantity

ML-540

Click for Larger Image
$ 195.00

1 - set
Available
Sargent Vestibule/Office Mortise Lock
A reversible wrought brass mortise lock made by the Sargent & Co. The lock measures 3-7/8 X 5- inches high with the edge plate being 1-1/8 X 7- inches long. The door plates measures 3 X 10 inches long and shows a little wear [scatches]. The cylinder lock [Baldwin]comes with 2 keys. This lock is a right hand as pictured if you need it reversed please let me know because there are several parts that need to be changed.
  Enter Quantity

ML-541

Click for Larger Image
$ 85.00

4 - sets
Available
Sargent Interior Mortise Locks
These locks are reversible and signed "Easy Spring" made by Sargent. The lock measures 3-3/8 X 3- inches high with the edge plate being 1 X 5- inches long. The parts are all brass with the plates measuring 2- X 7 inches long.
  Enter Quantity

ML-545

Click for Larger Image
$ 225.00

1 - set
Available
Norwalk Eastlake Mortise Lock
A reversible lock that measures 3- X 3-5/8 inches high with the edge plate being 7/8 X 5- inches long. The cast bronze door plates measures 1- X 5-5/8 inches long and were made by Norwalk Lock Co. This lock has a 2- inch backset.
  Enter Quantity

ML-546

Click for Larger Image
$ 25.00

4 - sets
Available
Penn Tubular Passage Latch Sets
New old stock brass passage locks complete with screws and instructions. The brass roses are 2 inches in diameter as well as the knobs. They have a 2-3/8 inch backset.
  Enter Quantity

ML-547

Click for Larger Image
$ 85.00

1 - set
Available
Interior Mortise Lock
A reversible mortise lock with wrought brass trim. The lock measures 3- X 3- inches high with the edge plate being 1 X 5- inches long. The door plates measure 2- X 7 inches long.
  Enter Quantity

ML-550

Click for Larger Image
$ 175.00

1 - set
Available
Skillman Entry Handle Lockset
New old stock reversible entrance lock in chrome. The lock itself measures 3- X 5-1/8 inches long with the edge plate being 1 X 7- inches long. This lock is set up as a right hand with hinges visable on the left pulling the door toward you. The cast handle measures 2-5/8 X 11- inches long.
  Enter Quantity

ML-561B

Click for Larger Image
$ 85.00

1 - set
Available
RHC Storm Door Lock
New old stock Reading Hardware storm/screen door lock with a privacy latch and key. The lock measures 2-1/8 X 3 inches high with the edge plate being X 4-3/8 inches long. The stamped brass door plate measures 1- X 4- inches long and has a 1- inch backset. This lock could also be used on French doors. The exterior parts have been added because the original plate was missing.
  Enter Quantity

ML-561

Click for Larger Image
$ 95.00

1 - set
Available
RHC Storm Door Lock
New old stock Reading Hardware storm/screen door lock with a privacy latch and keys. The lock measures 2-1/8 X 3 inches high with the edge plate being X 4-3/8 inches long. The stamped brass door plates measure 1- X 4- inches long and has a 1- inch backset. This lock could also be used on French doors.
  Enter Quantity

ML-562

Click for Larger Image
$ 85.00

1 - set
Available
Interior Mortise Lock
A reversible new old stock mortise lock that measures 3- X 3- inches high with the edge plate being 7/8 X 5-5/8 inches long. The door plates measure 1-7/8 X 6-1/8 inches long and are steel with a brass finish.
  Enter Quantity

ML-563

Click for Larger Image
$ 35.00

1 - set
Available
Narrow Tubular Lockset
Made by Lockwood this tubular lock has a 1- inch backset. The stamped brass door plate measure 1-7/8 X 5- inches long. This would be a great set for a French door and takes up 2- inches from the edge of the door.
  Enter Quantity

ML-565

Click for Larger Image
$ 25.00

0 - pcs.
Available
Passage Mortise Locks
A reversible passage mortise lock with a cast brass edge plate. The lock measures 3- X 1-5/8 inches high with the edge plate being 7/8 X 3-3/8 inches long. The lock has a 2- inch backset and has never been used.
  Enter Quantity

ML-566

Click for Larger Image
$ 85.00

2 - sets
Available
Interior Mortise Lock
A reversible new old stock mortise lock that measures 3- X 3- inches high with the edge plate being 7/8 X 5-3/8 inches long. The door plates measure 1- X 6 inches long and are stamped brass.
  Enter Quantity

ML-568

Click for Larger Image
$ 20.00

1 - pc.
Available
Passage Mortise Lock
New old stock passage lock with a 1- inch backset. The lock measures 2- X 1-7/8 inches high with the edge plate being 7/8 X 3-3/8 inches long.
  Enter Quantity

ML-569

Click for Larger Image
$ 85.00

2 - sets
Available
Interior Mortise Lock
A reversible new old stock mortise lock that measures 3- X 3- inches high with the edge plate being 7/8 X 5-3/8 inches long. The door plates measure 1-5/8 X 7 inches long and are stamped brass.
  Enter Quantity

ML-570

Click for Larger Image
$ 225.00

0 - set
Available
RHC Mortise Lock
A reversible mortise lock made by the Reading Hardware Co. and is in the "Elaine" pattern. The lock measures 3- X 3- inches high with the edge plate being 7/8 X 5- inches long. The cast bronze door plates measure 2 X 5- inches long. This set is in "as found" condition and was only washed off.
  Enter Quantity

ML-571

Click for Larger Image
$ 15.00

5 - sets
Available
Kwikset Screen Door Latches
Never used reversible brass screen door latches complete with instructions and still in the box. These latches have a privacy lock.
  Enter Quantity

ML-572

Click for Larger Image
$ 350.00

1 - set
Available
Branford Exterior Entry Lock
A reversible double key entry lock in cast brass made by the Branford Lock Co. The lock measures 3-5/8 X 5 inches high with the edge plate being 1 X 7- inches long. The plate measures 2 X 7 inches long. This lock has 3 keys, only 2 in the picture.
  Enter Quantity

ML-573

Click for Larger Image
$ 325.00

1 - set
Available
RHC Entry Lock
A reversible double key entry lock in cast bronze made by the Reading Hardware Co. in the "Americus" pattern. The lock measures 3- X 5- inches high with the edge plate being 1 X 7-3/8 inches long. The plate measures 3 X 12- inches long and the rosette,key escutcheon and strike plate are replacement parts.
  Enter Quantity

ML-577

Click for Larger Image
$ 275.00

1 - set
Available
R & E Entry Mortise Lock
A reversible double key entry lock in wrought bronze made by the Russell & Erwin of New Britian, Conn. The lock measures 3-5/8 X 4-7/8 inches high with the edge plate being 1 X 7 inches long. The plate measures 2-1/8 X 7-5/8 inches long.
  Enter Quantity

ML-580

Click for Larger Image
$ 250.00

1 - set
Available
Corbin Vestibule/Office Mortise Lock
A left hand only lockset in the "Olympus" pattern made by Corbin of New Britian,Conn. The lock measures 3-7/8 X 5-3/8 inches high with the edge plate being 1-5/16 X 7-7/8 inches long. The cast bronze door plates unrestored measure 2-7/8 X 13 inches long. The lock has a 2-13/16 inch backset and a 1- inch door thickness required.
  Enter Quantity

ML-584

Click for Larger Image
$ 350.00

1 - set
Available
BLW Double Key Entry Lock
A reversible double key entry lock in wrought bronze made by the Branford Lock Works and is in the "Oriental" pattern. The lock measures 3-5/8 X 4- inches high with the edge plate being 1 X 7 inches long. The plate measures 2 X 7- inches long and has a patent date of July 31, 1865.
  Enter Quantity

ML-585

Click for Larger Image
$ 225.00

1 - set
Available
Norwalk Interior Mortise Lock
A rare find NOS never used reversible lock that measures 3 X 3-5/8 inches high with the edge plate being 7/8 X 5- inches long. The cast bronze door plates measures 1- X 5- inches long and were made by Norwalk Lock Co. This lock has a 2- inch backset.
  Enter Quantity

ML-586

Click for Larger Image
$ 175.00

1 - set
Available
Double Pocket Door Lock
Made by Corbin this set has never been used and with a door thickness of 1-3/8 inches or thicker. The locks measure 3-3/8 X 5- inches high with the edge plate being 1 X 7-5/8 inches long. The wrought bronze door pulls measure 2-1/8 X 4-5/8 inches long. All parts are original, even the key.
  Enter Quantity

ML-588

Click for Larger Image
$ 275.00

1 - set
Available
Corbin Double Key Entry Lock
A reversible double key entry lock in wrought bronze made by the P. F. Corbin Co. in the "Ceylon" pattern. The lock measures 3- X 4-5/8 inches high with the edge plate being 1 X 7- inches long. The wrought bronze plate measures 1-7/8 X 7- inches long.
  Enter Quantity

ML-589

Click for Larger Image
$ 95.00

1 - set
Available
Bedroom Lock
Not sure what this lock is called or the maker? Appears to be from the late 1800's and looks like the passage locks we use today. The lock is reversible and is made of cast iron and brass. It has a 3- inch backset and will fit a door that is 1-1/8 to 1- inch thick. The hollow brass knobs are pinned on the the main assembly and a puch is used to remove them. The lock also has a privacy button on the far right. looks like a 1-3/8 diameter hole for the assembly is needed. The strike plate was added.
  Enter Quantity

ML-591

Click for Larger Image
$ 295.00

1 - set
Available
Victorian Pocket Door Lock
A large cast bronze lock with a patent date of March, 22,1870. The lock measures 4- X 6-5/8 inches high with the edge plate being 1-5/16 X 9- inches long. The pulls measure 2- X 6- inches long and the door must be at least 1-5/8 inches thick.
  Enter Quantity

ML-592

Click for Larger Image
$ 325.00

1 - set
Available
RHC Office Mortise Lock
A reversible office or vestibule lock in cast bronze made by the Reading Hardware Co. in the "Columbian" pattern. The lock measures 3- X 4-5/8 inches high with the edge plate being 1 X 6- inches long. The front door plate measures 2- X 8- inches long. This set is known for the hidden fox heads. The lock is pictured as a right hand, if you need it reversed please let me know in the comments section.
  Enter Quantity

ML-594

Click for Larger Image
$ 175.00

1 - set
Available
Russwin Colonial Revival Lock
A reversible entrance lock with wrought iron exterior trim. The lock itself measures 3- X 5-3/8 inches long with the edge plate being 1 X 7-3/8 inches long. This lock is set up as a right hand with hinges visable on the left pulling the door toward you. The wrought iron handle measures 2-7/8 X 11- inches long.
  Enter Quantity

ML-596

Click for Larger Image
$ 130.00

1 - set
Available
RHC Entry Mortise Lock
A reversible entry lock in wrought brass with some of the copper and black finish remaining. The lock measures 3- X 5 inches high with the edge plate being 1-1/8 X 7 inches long. The wrought plates measures 2- X 8 inches long and 2- X 9 inches long. Exterior knob has small dent on the face of the knob.
  Enter Quantity

ML-597

Click for Larger Image
$ 350.00

1 - set
Available
BLW Double Key Entry Lock
A reversible double key entry lock in cast bronze made by the Branford Lock Works and is in the "Oriental" pattern. The lock measures 3-5/8 X 4-7/8 inches high with the edge plate being 1 X 6-13/16 inches long. The plate measures 2 X 7 inches long. This set is in "as found" condition and was not restored, only keyed and added a key escutcheon.
  Enter Quantity

ML-598

Click for Larger Image
$ 150.00

1 - set
Available
Entry Mortise Lock
A reversible entry lock and door plates have never been used. The lock measures 3-5/8 X 5-1/2 inches high with the edge plate being 1 X 7-3/4 inches long. The wrought plates measures 2- X 8 inches long and 2-1/4 X 7 inches long,interior. The knobs and cylinder were added to make the lock complete.
  Enter Quantity